Our Products Security, Vending and Other Electronic Products

Sensitive Walk Through Metal Detector ThruScan® s27-i

ThruScan s27-I is our latest and advanced metal detector which is made to protect administrative buildings, court houses etc.

  • International norms (NILECJ-0601 L1-5/ NIJ 0601.02 Small Object Sensitivity 60529, EN 60068, EN60950 Class1 / IP44) In conformity with ECAC DOC 30 Standard 2, CE European Union Norms and produced under ISO 9001: 2008 QMS
  • Certified in Compliance to EN 61000-6-3, EN 61000-6-1 regulations and in compliance with DIRECTIVE 2002/95/EC (restriction of the use of certain hazardous substances in electrical and electronic equipment)
  • Multi-Zone - 27 Detection Zones (Up/Middle/Down and Left/Middle/ Right and Front/Rear)
  • Separate Sensitivity Settings for Different Detection Zones
  • Standard Preset JAILHOUSE / AIRPORT / MILITARY / POLICE PREMISES / SHOPPING MALL Security Levels
  • Whilst Normal Operation, displays IN/OUT Counters and Security Level on 64x128 GLCD without abbreviations so that Security Staff can easily understand
  • Capable to Detect both Ferrous and Non-Ferrous Metallic Threat Objects Considered Dangerous by International Security Authorities. 
  • Displays Location of the Detected Metal Objects with Continuous LED Zone Indicators on Both Side Panels from topto bottom
  • Can detect when tested both individually and in combination.
  • Detects all threat objects even concealed, hidden with

camouflage and/or wrapped. Impossible for such threat objects to pass through the WTMD without causing an alarm.

  • No Interference between Zones and No False Alarm
  • Random Alarm Feature enables to scan some percentage of clean people
  • Homogeneous Magnetic Field – No Dead Points – Same Detection Capability from bottom to top
  • Detects Metals regardless their orientation
  • 20 sensitivity levels, 246 adjustable sensitivity steps at each, Preset NILECJ Sensitivity Program, - 10 Preset International Security Programs
  • Automatic Frequency Selection Feature
  • Metal Density-Mass, Signal Strength Display at 10-level-VU meter with green, yellow, red LEDs easilyallows sight from distance
  • Superior Discrimination, Pin Point target location identification with Graphical zone display on Control Unit
  • Auto Calibration (Automatically calibrates itself up to Environmental Conditions) No Set Up Changes necessary when relocated and/or new Magnetic Objects brought Near-By
  • Human Health friendly Very Low Frequency VLF technology, No affects to Pace Makers, Pregnant and Magnetic Media
  • Green/Red bicolor traffic through LEDs easily allows sight from distance 60 Persons/Minute and LED AlarmIndicators on side panels
  • Record Statistics of Operation Duration, number of visitors and alarms
  • Real Time Environmental Magnetic Noise Level Display
  • 10 Adjustable audio tones with 10 volume levels (enabling Mute Operation) Adjustable Alarm Duration
  • IR Protection Feature enabling perfect low false alarm operation/
  • Continuous Detection Mode Selection Enabled
  • Optional IP 65 (EN 60529) protection
  • Five Digit Incoming/ Outgoing Alarm Counters (Visible/Invisible)
  • Interference free Operation from other Electronic Devices and Does not affect other Electronic Equipment. Necessary filtering precautions have been taken
  • Four-digit changeable digital Pin Code and Mechanical Lock
  • Automatic Failure Display Function on GLCD with continuous self checking of key parameters (BITE - Built In test Equipment)
  • Reloading the factory default settings by one-touch button
  • Easy Programming and Display via High Resolution GLCD (Graphical Liquid Crystal Display)
  • Different Menu Languages, Standard menu in English, German, Spanish, Turkish and Arabic
  • Relay output for recording CCTV, Photo Recording, controlling turnstiles, etc.
  • Built-in Uninterruptible Power Supply (UPS) enabling 2 hours operation without mains
  • Battery ON/OFF Feature enabling Operation Without Mains
  • Easy-to-mount and assemble walk through metal detector (15 Minutes) Male/Female Socket-Connector Design
  • Built for 7/24 Continuous Operation
  • 74 cm Net Passage Width and 200 cm Net Passage Height
  • Interference free Operation at Middle Level Sensitivity of 10 cm Distance Constant Metals and 200 cm distance Moving Metallic Objects
  • Installation and Operation without interference between two detectors up to a distance of min. 5 cm
  • Audio-Visual alarms are noticeable at a range of 4 meters
  • Micro-Processor Settings do not change when there is an electricity cut-off
  • No interference with Storage Media, Flash Memories, CD, Diskettes and other electronic devices
  • Magnetic Field inside all passage area is 0.1 Gauss
  • All Electronic Units (electronic unit, power supply, battery, adapter etc..) are inside the Equipment. No external units.
  • ABS Footers for sturdy placement and durable use.
  • Operation Mode, Programming Parameters and Error Codes are Displayed on Wide 64x128 Characters GLCD Screen
  • Optional -SCADA Software-Controlled remote data communication and Networking of Multiple Metal Detectors; Software to Change settings by PC (Digital output for Network Connection
  • Optional REAL-TIME VIDEO PROSECUTION UNIT enabling recording of Alarmed Visitors Pictures/All Visitors pictures or video with Time-Stamp to SD Card ~30.000 Images
  • Optional IRDA(Pilot) Remote Control Unit
  • Detection functions have been tested with ECAC/NIJ/TSA Test Kits and Certified

garuntee en

Technical Features

Package Dimensions(W x L x H):

Ambient Temperature:-20°C to +70°C

Box 1:81 x 235 x 21cm (65 kg)

Operating voltage:70 VAC – 270VAC / 50Hz - 60Hz

Box 2:43 х 81 х 27 cm& (14 Kg)

Power:10W Stand By- 20W (Alarm)

Net Weight:61 Kg

Net ­Passage:74 x 68 x 200 cm
External:85 x 68 x 220 cm

Gross Weight: 79 Kg


ThruScan s27-I

Elektral A.Ş.

+902323767300     elektral@elektral.com.tr